The Outdoor Units are charged from the factory for matched indoor section and up to 15 feet of piping. This unit is designed to operate at outdoor ambient temperatures from 55°F to 120°F in cooling and from - 10°F to 66°F in heating. Only AHRI approved indoor matches are approved for use with these models.
AccuLink™ Air Conditioners
This outdoor unit contains the AccuLink™ Air Conditioners digital communication with 2 wire connection to outdoor and Plug-n-Play set up.
Unit casing is constructed of heavy gauge. G60 galvanized steel and painted with a weather resistant powder paint on all louvered panels and pre-paint on all other panels. Corrosion and weatherproof CMBP-G30 DuraBase™ base.
Refrigeration system controls include condenser fan, compressor contactor and high and low pressure switches. A factory supplied, field installed filter is standard.
Inverter driven scroll compressor with 25 to 100% output capacity on heat pumps and 30 to 100% output capacity on air conditioners. Noise enclosure minimizes sound levels and built in compressor protection protects compressor will reduce operating speed and current draw to maintain operation while protecting the compressor.
The Spine Fin™ outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered panels.
Low Ambient Cooling
As manufactured, this system has built in freeze protection that will allow cooling operation below 55°F but will reduce capacity or shutdown completely to prevent operation under adverse conditions.
The 950/850 Control is required and provides Plug-n-Play setup and 3wire connection.