For the best Gemaire experience, please update your web browser.

ARGCO 2550050Z - Top Beam Clamp, Galvanized Steel, 3/8", UL, FM PHD

Item: 2550050Z
MFR: 2550050Z

This product is no longer available for purchase.

Comparable Products

Description

ARGCO 2550050Z - Top Beam Clamp, Galvanized Steel, 3/8", UL, FM PHD

Function:
Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment. The universal design of the 3/8" allows it to be used in an inverted position on the bottom flange of a beam as well.

Approvals:
Underwriters' Laboratories Listed in the U.S. (UL), Canada (CUL), or sizes 3/8" to 7/8" only. Factory Mutual Approved for rod sizes 3/8" and 1/2" only. Complies with Federal Specifications A-A-1192A (Type 19) and Manufacturers' Standardization Society ANSI/SP-69 and SP-58 (Type 19). The 3/8" rod can be used in an inverted position (bottom of beam) and follows the same U.S. (UL), Canada (CUL), and Factory Mutual Approvals. Used in this manner the 3/8" also complies with Federal Specifications A-A-1192A (Type 23) and Manufacturers' Standardization Society ANSI/SP-69 and SP-58 (Type 23)

Material:
Malleable iron with hardened steel cup point set screw.

Finish:
Plain or electro-galvanized

Specifications

NameARGCO 2550050Z - Top Beam Clamp, Galvanized Steel, 3/8", UL, FM PHD
Gemaire Item Number2550050Z
Manufacturer Product Number2550050Z
SKU - PIM Number13538039457464759
ERP Number376946
Unit of MeasureEA
Weight0.3 Pounds (Lb)
Length1.3 Inches (In)
Width0.8 Inches (In)
Height1.5 Inches (In)
Country of OriginCHN
BrandARGCO
Diameter3/8"
ApplicationThe open U design permits rod adjustment. May be used in an inverted position on the bottom flange of a beam as well.
ColorSilver
CompositionElectro Galvanized Malleable iron with hardened steel cup point set screw and lock nut.
For Use WithDesigned for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch.
Size1 1/4" x 3/4" x 1 1/2"
GEM - Case Quantity

Documentation

Parts List