For the best Gemaire experience, please update your web browser.

Aspen AAM24F-000 - 2 Ton AAM Series Multi-Position Air Handler, R-22 Piston

Item: AAM24F-000
MFR: AAM24F-000

This product is no longer available for purchase.

Comparable Products

Description

AAM Series Multi-Position Air Handlers Standard Features:
  • APPLICATION VERSATILITY - Upflow or horizontal right as shipped (field-convertible for down-flow or horizontal left applications). Can be ARI matched with most brands of air conditioners or heat pumps for use with either R22 or R410a when proper metering device is used.
  • CABINET - Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2" faced insulation to prevent sweating and mold growth, to encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure insulation remains in place. Units ship with disposable filter in filter rack.
  • MODULAR HEAT KITS - Heat kits available with either circuit breakers or terminal blocks. Available from 3 to 30 kW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using Molex plugs or can be ordered factory-installed. Controls are accessible from the front for easy service. Electrical connections can be made from the top or left. Disconnect does not protrude through the wall panel. Fan time delay relay standard for increased efficiency.
  • ELECTRONIC CIRCUIT BOARD - Electronic circuit board provides 30 seconds ON/OFF blower time delay extracting more heat/cool from the coil.
  • BLOWER - Direct drive multi-speed blowers circulate air quietly and efficiently. 3-speed motors allow for precise air volume selection. Motor speeds can be easily selected via motor terminals. Blowers mounted on rails so they can be easily removed for service.
  • DX COIL - High efficiency rifled copper tubes/enhanced aluminum fins provide maximum heat transfer. All coils immersion tested at 500 psi then nitrogen pressurized and factory sealed for maximum reliability. Liquid-line Schrader allows pre-installation pressure testing. Available with either orifice or TXV metering device. Field-installable bolt-on TXVs are also available. Rugged GLP drain pan holds minimal condensate while eliminating the possibility of corrosion. Drain pan is UV safe. Galvanized metal drain pan with bottom primary and secondary drain connections or alternate right side primary. All connections 3/4" FPT. Access door allows for coil cleaning.


Specifications

NameAspen AAM24F-000 - 2 Ton AAM Series Multi-Position Air Handler, R-22 Piston
Gemaire Item NumberAAM24F-000
Manufacturer Product NumberAAM24F-000
SKU - PIM Number1394543527544
ERP Number321133
Unit of MeasureEA
Weight100.0 Pounds (Lb)
Length20.5 Inches (In)
Width21.0 Inches (In)
Height40.0 Inches (In)
Country of OriginUSA
BrandAspen®
Equipment TypeStraight Cool
Tonnage2
StageSingle
SEER13
SEER14
EER11.5-11.6
RefrigerantR-22
CFM695-915
Cooling Capacity24000
Air FlowMulti-Position
BTU Output24000
Voltage208-230 VAC
PhaseSingle
Cycle/Hertz50/60 Hz
Rated Current Amps2.8
Minimum Circuit Amps30
Maximum Fuse Size60
Blower Motor HP1/5 HP
Blower Motor RPM825
Filter Size16" x 20" x 1"
Rated Load Amps2.8
Drain Connection Size3/4" FPT
Suction Line FittingSweat
Suction Line Size7/8"
Motor TypePSC
Liquid Line FittingSweat
Liquid Line Size3/8"
CertificationsAHRI
ColorSilver
Sound Level (dBA)0
Warranty OfferedYes
Energy Star RatedNo
UL ListedNo
Product FamilyAAM
Drain Connections2
GEM - Case Quantity

Documentation

Parts List