For the best Gemaire experience, please update your web browser.

Minneapolis DUCTD7 - Duct Blaster System Series B

Item: DUCTD7

This product is no longer available for purchase.

Comparable Products


Minneapolis Duct Blaster System Series B
The development of the Minneapolis Duct Blaster® has revolutionized performance testing of forced air distribution systems for builders, HVAC contractors, and utility DSM programs. The Minneapolis Duct Blaster® is a calibrated air flow measurement system designed to test and document the airtightness of forced air duct systems in both houses and light commercial buildings. The Duct Blaster® fan is connected directly to the duct system in a house, typically at a central return, or at the air handler cabinet. With the remaining registers and grilles temporarily taped off, duct airtightness is measured by either pressurizing or depressurizing the duct system and precisely measuring the fan flow and duct pressure. Duct airtightness measurements are used to diagnose and demonstrate leakage problems, estimate efficiency losses from duct leakage, and certify compliance with duct leakage standards such as California's Title 24 Building Energy Efficiency Standards.
  • The lightweight Duct Blaster® fan weighs just 7 pounds, but delivers enough air flow (an amazing 1,500 CFM) to test the leakiest duct systems
  • Quick and accurate airtightness measurements from 10 - 1,500 CFM
  • Compatible for both pressurization and depressurization testing
  • New Cruise Control feature will automatically control the speed of the Duct Blaster® fan during testing
  • The Duct Blaster® can be easily used in new construction applications where a Blower Door can't be used (e.g. before sheet rock is installed)
  • The Duct Blaster® can also be used as a powered capture hood to accurately measure air flows through the air handler fan, registers and grilles, and exhaust fans. The new FlowBlaster capture hood accessory will accurately measure supply, return and exhaust flows from 10 to 300 CFM
  • Both 110V and 220V models available
  • Padded nylon carrying case with shoulder strap
Kit Includes:
  • Duct Blaster Fan with Fan Speed Controller
  • DG-700 Digital Pressure and Flow Gauge
  • Three Flow Rings
  • Twelve feet (3.7 m) of 10 in. (25 cm) diameter flex duct
  • Heavy Duty Carrying Case
  • Static pressure probe
  • Sample roll of DuctMask™ Temporary Register Seal
  • Manual and Duct Blaster Training Video
  • TECBLAST Software CD


NameMinneapolis DUCTD7 - Duct Blaster System Series B
Gemaire Item NumberDUCTD7
Manufacturer Product NumberDUCTD7
SKU - PIM Number1391689662372
ERP Number334260
Unit of MeasureEA
Weight41.0 Pounds (Lb)
Length15.0 Inches (In)
Width16.0 Inches (In)
Height28.0 Inches (In)
Country of OriginUSA
BrandMinneapolis Duct Blaster®
Auto Power OffNo
Includes CaseNo
Warranty OfferedNo
GEM - Case Quantity

Parts List