One RA1430WJ1NA Rheem - Classic 2 1/2 Ton 14 SEER Condenser, 208-230 Volt, 1 Phase, 60 Hz - Meets Southwest EER Requirements
Rheem Classic® RA14**W Series Air conditioners
- The RA14**W 1 1/2 to 3 1/2 ton family meets minimum Southwest regional standard requirements
- New composite base pan - dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed
- Powder coat paint system - for a long lasting professional finish
- Scroll compressor - uses 70% fewer moving parts for higher efficiency and increased reliability
- Modern cabinet aesthetics - increased curb appeal with visually appealing design
- Curved louver panels - provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
- Optimized fan orifice - optimizes airflow and reduces unit sound
- Rust resistant screws - confirmed through 1500-hour salt spray testing
- PlusOne™ Expanded Valve Space - 3"-4"-5" service valve space - provides a minimum working area of 27-square inches for easier access
- PlusOne™ Triple Service Access - 15" wide, industry leading corner service access - makes repairs easier and faster. The two fastener removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly
- Diagnostic service window with two-fastener opening - provides access to the high and low pressure.
- External gauge port access - allows easy connection of "low-loss" gauge ports
- Single-row condenser coil - makes unit lighter and allows thorough coil cleaning to maintain "out of the box" performance
- 35% fewer cabinet fasteners and fastener-free base - allow for faster access to internal components and hassle-free panel removal
- Service trays - hold fasteners or caps during service calls
- QR code - provides technical information on demand for faster service calls
- Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.
General Terms Of Limited Warranty
- Conditional Parts (Registration Required): Ten (10) Years
- Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty.
- For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the Manufacturer for a copy of the product warranty certificate.
One R95PA0701317MSA Rheem R95PA-0701317MSA - 95% AFUE, 70K BTU, 1 Stage, Multi-Position Gas Furnace with PSC Motor
Rheem Classic® Series Multi position Gas Furnaces
- 95% residential gas furnace CSA certified
- 4-way multi-poise design
- PlusOne™ Diagnostics 7-Segment LED all units
- PlusOne™ Ignition System - DSI for reliability and longevity
- PlusOne™ Water Management System with patented Blocked Drain Sensor
- Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
- Low profile "34 inch" cabinet ideal for space constrained installations.
- Blower Shelf design - serviceable in all furnace orientations
- Pre marked hoses - insures proper system drainage
- Vent with 2" or 3" PVC
- Replaceable Collector box
- Hemmed edges on cabinet and doors
- Quarter turn fasteners for tool less access
- Integrated control boards feature dip switches for easy system set up
- Self priming condensate trap
One RG33636C175B1805AP ADP - 1 1/2 - 3 Ton Aluminum Coil Cased, Upflow/Downflow, 20 1/2"D X 17 1/2"W X 18 1/2"H, TXV, R410A
Introducing Healthy Solutions® Premier Evaporator Coils by ADP. These coils match perfectly with your system, providing an upgrade over standard matched coils.
- High efficiency lanced fin design.
- Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air.
- Copper refrigerant connections for easy brazing on aluminum slab models.
- Cased coils have heavy gauge embossed galvanized cabinets fully lined with 5/8" foil faced insulation.
- All A-Coils are upflow or downflow capable.
- UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer
- Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan.
- Expansion valve with improved temperature sensing:
- Mounted inside cabinet to prevent external sweating
- Bulb clamped standard factory installed