The RSPM series of Package Air Conditioners are designed to be the most efficient, quickest to install, easiest to service, and most reliable units in the industry - while still maintaining an affordable price. This platform provides you with a full line of nominal capacities from 2 through 5 tons utilizing earth friendly R-410A refrigerant. This unit is suitable for use in mobile homes, manufactured housing and conventionally constructed residential and commercial buildings where horizontally-ducted systems are preferred. The RSPM Models are 14 SEER and are AHRI-certified. As with all units offered by Rheem, we started our design process with input from the customer. From fan grille to the base rails, Rheem has combined 30 years worth of package unit design experience with input from Dealers to meet the latest application requirements. Starting at the bottom, the base rails allow for separation between the unit base and the ground level, protecting the base from ground moisture and providing air circulation around the unit. Constructed from sturdy 14 gauge, G-90 sheet metal, the base rails also allow for easier maneuverability during installation.
To provide flexibility in space limited installations, the unit can be installed flush to the structure without blocking airflow over the outdoor coil or making any screws inaccessible for maintenance. Furthermore, the cabinet is a slim 33" wide. Full louver coil protection makes Rheem unique in the industry and also totally protects the outdoor coil from vandalism and weather extremes. Two round 14" duct collars are included with the unit, which makes attaching duct a snap. The collar is crimped around the leading edge, making it easier to install duct onto the collar. A metal bead around the circumference prevents the attached ducting from sliding off after installation. Keeping service technicians in mind, Rheem takes pride providing easy access to internal components. The outdoor section top cover is easily removed to allow access to the scroll compressor outdoor fan motor and refrigerant tubing.
The indoor section top cover also easily opens to access the removable blower housing and motor. This also gains total access to the indoor coil for cleaning and service. The indoor motor and blower system will achieve nominal 400 CFM per ton up to a minimum of .8 inches of static pressure, which helps to eliminate customer dissatisfaction over poor airflow brought about by high-static duct designs. Optional electric heat can be specified as factory installed, or can be easily installed in the field, with either dual or single point power connections.