For the best Gemaire experience, please update your web browser.
Branches closing due to Hurricane Sally. Details

Rheem TZPL-090CA - Thermal Zone - Commercial 7 1/2 Ton, R410A Heat Pump, 208-230/3/60, Standard

Item: TZPL-090CA
This product is currently not available for purchase.
What’s the price?
Sign in or register for pricing.

Your Order Templates
Save products for later, or create order templates to quickly re-buy items for routine jobs.

Add To Order Template

Inventory At Nearby Branches



TZPL-090 Series Commercial High-Efficiency Remote Heat Pumps

Standard Unit Features
  • CABINET - Galvanized steel with powder coat paint finish. The powder coat paint finish is high gloss, durable and capable of withstanding a 1000-hour salt spray test per ASTM B 117. All access panels can be opened or removed without affecting the structural strength of the unit. Stamped louvered panels offer 100% protection for the condenser coil.
  • EQUIPMENT GROUND - Lug for field connection of ground wire.
  • CONTACTOR - The contactor is an electrical switch which operates the compressor and outdoor fans. Its 24 volt coil is activated on a call for cooling or heating.
  • TRANSFORMER - 75 VA step-down type, from Line to 24 volts with resettable circuit breaker.
  • CAPACITOR - Help provide starting torque necessary to boost the condenser fan motors to operating speed by directing their stored energy to the starter winding in step with the running winding.
  • DEMAND DEFROST CONTROL - Used when unit is in heating mode to defrost outdoor coil.
  • AUTO-RESET HIGH PRESSURE CONTROL, AND AUTORESET LOW PRESSURE CONTROL - To provide compressor protection under abnormally high head pressure conditions (outdoor fan failure, restriction, dirty coil, etc.) or abnormally low suction pressure conditions (restrictions, TEV failure, loss of charge, indoor blower failure, etc.) while eliminating nuisance tripping sometimes experienced with conventional control systems.
  • COIL - Constructed with copper tubes and aluminum fins mechanically bonded to tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 550 PSIG (3792 kPa) internal pressure.
  • BASE PAN - Galvanized steel with powder coat paint finish.
  • COMPRESSOR - The Scroll Compressor is hermetically sealed with internal high temperature protection, and durable insulation on motor windings. The entire compressor is mounted on rubber grommets to reduce vibration and noise.
  • TX VALVE - Used when unit is in heating mode and outdoor coil functions as evaporator.
  • CRANKCASE HEATER - Minimizes refrigerant migration to compressor sump.
  • SUCTION LINE ACCUMULATOR - To prevent liquid slugging of compressor.
  • REFRIGERANT CONNECTIONS - All field sweat joints are made external of the unit and are located close to the ground for a neat looking installation.
  • SERVICE VALVES - Standard on liquid line and vapor line.
  • REVERSING VALVE - Sized for maximum capacity and efficiency, 24V coil, energized in heating.


NameRheem TZPL-090CA - Thermal Zone - Commercial 7 1/2 Ton, R410A Heat Pump, 208-230/3/60, Standard
Gemaire Item NumberTZPL-090CA
Manufacturer Product NumberTZPL-090CA
SKU - PIM Number2277393385125919
ERP Number389316
Unit of MeasureEA
Weight398.0 Pounds (Lb)
Length42.7 Inches (In)
Width31.1 Inches (In)
Height48.8 Inches (In)
Country of OriginUSA
Equipment TypeHeat Pump
Cooling Capacity86000
Heating Capacity55000-90000
Voltage208-230 VAC
Full Load Amps4.2
Cycle/Hertz60 Hz
Circuit Breaker - Max Amps60
Circuit Breaker - Min Amps36
Rated Load Amps25
Locked Rotor Amps190
Suction Line FittingSweat or Braze
Liquid Line FittingSweat or Braze
Liquid Line Size (OD)1/2"
Sound Level (dBA)82
Warranty OfferedYes
Energy Star RatedNo
UL ListedYes
Product FamilyTZPL
GEM - Case Quantity


Parts List

Parts list is loading, wait for a moment....