Tempstar RAS072L0AA0AAA - 6 Ton, 13 SEER, R410a Packaged Rooftop, 460V, 3 Phase, Standard Motor

Item: RAS072L0AA0AAA
MFG: RAS072L0AA0A
Loading Inventory
Loading price
/ EA

Description

BUILT TO LAST, EASY TO INSTALL AND SERVICE:
  • One-piece, standard efficiency electric cooling with a low profile, prewired, tested, and charged at the factory.
  • Field convertible from vertical to horizontal airflow on all models. No special kit required on 036 - 150 models. Field accessory supply duct kit required for 180 size model only.
  • Full perimeter base rail with built-in rigging adapters and fork truck slots.
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection.
  • Fully insulated cabinet.
  • Single-stage or two stage cooling capacity control.
  • Single or dual scroll compressor with internal line-break overload protection.
  • All units have high and low pressure switches.
  • Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door.
  • Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture.
  • Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
  • Newly-designed indoor refrigerant header for easier maintenance and replacement.
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain.
  • Belt drive evaporator-fan motor and pulley combinations available to meet any application.
  • Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
  • "No-strip" screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit's metal.
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement.
  • Outdoor temperature cooling operation range up to 115°F (46°C) and down to 40°F ( 4°C ) using winter start kit.
  • Fixed orifice metering devices on all models to precisely control refrigerant flow.
  • Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy.
  • Standard, medium and high static fan motor options available.
  • Capable of thru-the-base or thru-the-curb electrical routing.
  • Single point electrical connections.
WARRANTY
  • 5 Year limited warranty on compressor
  • 5 Year limited warranty on electric heater parts
  • 1 Year limited warranty on parts

California residents: see Proposition 65 Warning

Documents

picture_as_pdf installation instructions

picture_as_pdf warranty document

picture_as_pdf specification sheet

Features and Specification

ERP ID 290483
Weight 607.000000
Length 74.375000
Locked Rotor Amps 62, 66
IEER 11.4
Maximum Fuse Size 20, 25, 40, 45
Height 41.375000
Filter Size 16" x 16" x 2"
Minimum Circuit Amps 25, 38, 42
Number of Fan Blades 1
UL Listed Yes
Refrigerant R-410a
Tonnage 6
Stage Single
Sound Level (dBA) 78
UOM EA
Rated Load Amps 19, 8.2
OPT Code 1PRAS072L0AA0AAA
Warranty Offered Yes
Phase Three
Width 46.750000
Voltage 460 VAC
UPC See Optical
Package Weight 645.000000
Product Family RAS
Certifications AHRI Certified, ARI Standard
Equipment Type Straight Cool
Brand Tempstar
Blower Motor RPM 1073, 1073-1457
Blower Motor HP 2 2/5 BHP
Energy Star Rated Yes
Air Flow Convertible
Cycle/Hertz 60 Hz
Circuit Breaker - Max Amps 20, 25, 40, 45
EER 11.2
Drive Type Belt
Drain Connection Size 3/4"
Drain Connections 1
Cubic Measurement 83.253600
Condenser Motor HP 1/4 HP
Compressor Scroll
Circuit Breaker - Min Amps 14, 25, 38, 42
Cooling Capacity 70000