Tempstar RAS101H0AA0AAA - 8 1/2 Ton, 11.2 EER, R410a Packaged Rooftop, 208/230V, 3 Phase
Item: RAS101H0AA0AAA
MFG: 305
Loading Inventory
Loading price
Description
BUILT TO LAST, EASY TO INSTALL AND SERVICE:
- One-piece, standard efficiency electric cooling with a low profile, prewired, tested, and charged at the factory.
- Field convertible from vertical to horizontal airflow on all models. No special kit required on 036 - 150 models. Field accessory supply duct kit required for 180 size model only.
- Full perimeter base rail with built-in rigging adapters and fork truck slots.
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection.
- Fully insulated cabinet.
- Single-stage or two stage cooling capacity control.
- Single or dual scroll compressor with internal line-break overload protection.
- All units have high and low pressure switches.
- Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door.
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture.
- Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
- Newly-designed indoor refrigerant header for easier maintenance and replacement.
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain.
- Belt drive evaporator-fan motor and pulley combinations available to meet any application.
- Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
- "No-strip" screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit's metal.
- Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement.
- Outdoor temperature cooling operation range up to 115°F (46°C) and down to 40°F ( 4°C ) using winter start kit.
- Fixed orifice metering devices on all models to precisely control refrigerant flow.
- Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy.
- Standard, medium and high static fan motor options available.
- Capable of thru-the-base or thru-the-curb electrical routing.
- Single point electrical connections.
Documents
picture_as_pdf warranty document
picture_as_pdf installation instructions
picture_as_pdf consumer literature
picture_as_pdf specification sheet
Features and Specification
| ERP ID | 366884 |
|---|---|
| Weight | 845.000000 |
| Length | 88.125000 |
| Locked Rotor Amps | 195 |
| IEER | 11.2 |
| Maximum Fuse Size | 60 |
| Height | 49.375000 |
| Filter Size | (4) 20" x 20" x 2" RA Filter, 20" x 24" OA Inlet Screen |
| Minimum Circuit Amps | 43 |
| Number of Fan Blades | 2 |
| UL Recognized | Yes |
| UL Listed | Yes |
| Refrigerant | R-410a |
| SEER | 13 |
| Tonnage | 8.5 |
| Stage | Single |
| Sound Level (dBA) | 83 |
| UOM | EA |
| Rated Load Amps | 29.5 |
| OPT Code | 1PRAS101H0AA0AAA |
| Warranty Offered | Yes |
| Phase | Three |
| Package Height | 49.375000 |
| Package Length | 88.125000 |
| Width | 59.500000 |
| Voltage | 208-230 VAC |
| UPC | See Optical |
| Package Weight | 880.000000 |
| Package Width | 59.500000 |
| Product Family | RAS |
| Certifications | AHRI Certified |
| Equipment Type | Straight Cool |
| CFM | 4250 |
| Brand | Tempstar |
| Blower Motor RPM | 518, 518-733 |
| Blower Motor HP | 1 7/10 BHP |
| Energy Star Rated | No |
| Air Flow | Convertible |
| AHRI Number | 4939484 |
| Cycle/Hertz | 60 Hz |
| Circuit Breaker - Max Amps | 110, 150, 60, 90 |
| EER | 11.2 |
| Drive Type | Belt |
| Drain Connection Size | 3/4" |
| Drain Connections | 1 |
| Dimensional Weight | 1862.000000 |
| Cubic Measurement | 149.823300 |
| Condenser Motor HP | 1/4 HP |
| Compressor | (1) Scroll |
| Circuit Breaker - Min Amps | 43 |
| Cooling Capacity | 97000 |